background image

User’s Guide

EMS 1.7R

14

Car Finder

Pressing button 1 twice when the alarm system is armed or in Valet mode will cause the siren

beep one time and the indicator flash six times to highlight the car location.

Automatic Functions

Auto Rearming

This feature can be selected using programming.

The alarm system will rearm and relock the doors 30 seconds after it has been disarmed

unless the doors, hood or trunk is opened or the ignition is switched on. This feature is to avoid
accidental disarming of the alarm system.

NOTE: If you arm the alarm system with the turbo timer turned on, the auto rearming will operate

as normal with the ignition switched on.

Passive Arming

This feature can be selected using programming.

Opening and closing the doors with the ignition switched off will cause the indicators to flash

twice and LED to flash quickly to indicate that the passive arming sequence has begun. If all the
doors, hood and trunk remain closed for 30 seconds the alarm system will arm (with or without
door locking depending on the program setting)

If you need to you can cancel the passive arming until the next switching the ignition on with

pressing button 2 during 30second arming period.

Ignition Safety Door Lock/Unlock

This feature can be selected using programming.

5 seconds after the ignition is turned on the doors will lock for passive safety and will

automatically unlock when the ignition is switched off. If the door is opened within 5 seconds of
the ignition being switched on, the door lock pulse will be cancelled to prevent the driver being
locked out.

You also can lock and unlock the doors at any time pressing button 1 and 2 on the transmitter.

2Stage Unlock

When the ignition is switched on all doors will automatically lock if 2stage unlock operation

is selected. When the ignition is switched off, the operation of the system will depend upon the
most recent disarming command. If you have pressed button 2 once only unlocking the driver’s
door then the system will unlock the driver’s door only when the ignition is switched off. If you
have pressed button 2 twice to unlock all the doors, then the system will unlock all the doors as
soon as the ignition is switched off.

If you have unlocked the driver’s door only while disarming, but then have pressed button 2

with the ignition on twice to unlock all the doors the alarm system will then unlock all the doors
on every switching the ignition off until you arm and disarm the alarm system again.

Автомобильная охранная система “MONGOOSE” Модель EMS 1.7R

39

РУССКИЙ

При активированной функции пассивного иммобилайзера

, после снятия системы с охра

ны включится блокировка двигателя. О ее отключении читайте в разделе Режим пассив
ного иммобилайзера.

Режим турбо таймера

Режим предназначен для продления времени работы двигателя оснащенного турбо

наддувом с целью охлаждения турбины. Для включения на 3 минуты режима турбо тай
мера нажмите при включенном зажигании последовательно с интервалом не более 3
секунд кнопки S и 3, или кнопки S и М для включения режима на 5 минут, включится
поддержка зажигания (если при установке сделаны необходимые подключения), вык
лючите зажигание, двигатель продолжит работать. Включение поддержки зажигания на
3 минуты система подтвердит одним звуковым сигналом и двумя вспышками фонарей,
а на 5 минут – 1 звуковым сигналом и тремя вспышками фонарей. При включенном
режиме тубо таймера вы можете поставить сигнализацию на охрану как обычно. Снятие
сигнализации с охраны, а также новая постановка на охрану до истечения выбранного
интервала времени не отключает поддержку зажигания. В режиме турбо таймера авто
матическая перепостановка на охрану работает как обычно. При включении тревоги
поддержка зажигания сразу выключится, и система перейдет в режим полной охраны.

При активированной функции Anti Hijack

, открыв дверь при включенной поддержке

зажигания, введите кнопкой аварийного отключения младший разряд PIN кода или
нажмите комбинацию кнопок на брелоке, запрограммированную для отключения пас
сивного иммобилайзера, для отключения Anti Hijack.

При включенном режиме пассивного иммобилайзера

 блокировка двигателя при снятии

с охраны не включится, чтобы не прерывать работу турбо таймера. Однако, если Вы
программно задали длительность задержки включения тревоги при не отключенном после
снятия с охраны иммобилайзере, тревога включится по истечении установленного пе
риода времени после открытия двери. Чтобы избежать включения тревоги, нажмите
кнопку (кнопки) отключения пассивного иммобилайзера.

Если Вы программно включили функцию предупреждения о снятии с охраны

, то при

снятии с охраны в режиме турбо таймера на пульте управления также включится пре
дупреждающая мелодия. 

Для отключения предупреждающей мелодии используйте кнопку

отключения пассивного иммобилайзера

, так как нажатие при включенном зажигании не

правильной кнопки при отключении иммобилайзера приведет к включению тревоги.

ВНИМАНИЕ: По окончании работы турбо таймера в режиме охраны или пассивного

иммобилайзера, блокировка двигателя включится сразу после выключения поддержки за%
жигания. Никогда не включайте режим при движении автомобиля!

Тихая охрана.

При срабатывании сигнализации, находящейся в режиме тихой охраны, индикация

тревоги производится только индикаторными фонарями и по каналу пейджера, сирена
не включается. Для активизации режима необходимо при постановке на охрану сразу
после нажатия кнопки 1 нажать одновременно кнопки 1 и 2.

Внимание! В режиме тихой охраны индикация срабатывания предупредительной зоны

датчика производится только пультом управления, сигналов сирены не будет.

Summary of Contents for EMS 1.7R



























Reviews: