14
26D3311
26D3311
15
NOTE: Clearance requirements as detailed in
“Clearances and Height Requirements” section of this
manual must be met before securing heater in place.
To prevent movement, the heater must be secured to the floor
or hearth.
1. Open the control access door and remove the screen.
2. Remove log set.
3. To remove the grate and base assembly, take out two screws
as shown in
Figure 16.
4. Lift grate and base assembly out of the firebox.
SECURING HEATER TO FLOOR
Lift grate and base assembly
using the grate only.
CAUTION
4. Secure the firebox with two anchoring screws
(
3
/
16
" x 1
1
/
4
" length) supplied with the fireplace
system.
See Figure 17 .
Note: If the unit is mounted on carpeting,
tile or combustible material without the
hearth, a metal or wooden base covering
the entire width and depth of the base must
be installed.
Figure 16 - Removing Grate and Base Assembly
Figure 17 - Securing Firebox to Floor or Hearth
