F
IREPLACE
S
ETUP
13
1. Remove the box containing the log from the firebox and discard the two (2) shipping pads. Carefully remove
the log from the box.
2. Position log over burner as shown in Figure 5. Wear protective gloves to place glowing ember meterial in front
and on top of burner tube. The ember material should be separated into small (nickel size) pieces and spread
evenly in front of burner. Lava rock may be placed on the hearth around the ember material.
Warning: Improper log placement may result in production of increased quanities of poisonous
carbon monoxide and soot.
3. Install the glass door assembly supplied separately from this package. The glass door is installed by inserting
the top two (2) pins into the receiving holes above the fireplace opening and then inserting two (2) pins into the
bottom. Use care not to bump or scratch the glass. Glass door assembly model number GD36PB or model
number GD36B must be installed when the fireplace is in use.
F
IGURE
5
DO NOT COVER
LARGE PORT HOLES
BURNER TUBE
LAVA ROCK
EMBER MATERIAL
53D9015. Rev 1 03/03
Summary of Contents for BBV400NE
Page 21: ...NOTES 21 53D9015 Rev 1 03 03 ...
Page 22: ...22 NOTES 53D9015 Rev 1 03 03 ...
Page 23: ...NOTES 23 53D9015 Rev 1 03 03 ...
