A
PPLIANCE
L
OCATIONS
AND
S
PACE
R
EQUIREMENTS
This appliance may be installed along a wall, across a corner or use an exterior chase. The BBV400NV Series
may be installed directly on the floor or on a raised platform to enhance its visual impact. Figure 2 illustrates a
variety of ways the appliance may be located in a room.
Due to high temperatures, the appliance should be located out of traffic and away from furniture and draperies.
I
NSTALLATION
P
REPARATION
8
F
RAMING
T
HE
E
NCLOSURE
Figure 3 shows a typical framing of this appliance assuming combustible materials are used. All required clearances
shown in Figures 1 and 3 to combustibles around the appliance must be adhered to. Any framing at the back and
sides of the appliance must be outside the spacers. Any framing on top of the appliance must be above the top
spacers.
Fireplace framing can be built before or after the fireplace is set in place. Framing should be positioned to
accommodate wall coverings and fireplace facing material.
F
IGURE
2
61 3/4"
61 3/4"
35 1/4"
35 1/4"
1/2" MIN. (13 MM)
1/2" MIN. (13 MM)
30 13/16"
30 13/16"
15 1/2"
15 1/2"
1" MIN. (25 MM)
1" MIN. (25 MM)
39"
39"
53D9015. Rev 1 03/03
Summary of Contents for BBV400NE
Page 21: ...NOTES 21 53D9015 Rev 1 03 03 ...
Page 22: ...22 NOTES 53D9015 Rev 1 03 03 ...
Page 23: ...NOTES 23 53D9015 Rev 1 03 03 ...
