This gas fireplace and its components are tested and safe when installed in accordance with this installation
manual. Report your dealer any parts damaged in shipment, particularly the condition of the glass. Do not install
any unit with damaged, incomplete, or substitute parts.
Read all of the instructions before starting the installation. Follow these instructions carefully during the
installation to ensure maximum safety and benefit. Failure to follow these instructions will void the owner’s
warranty and may present a fire hazard.
When planning a fireplace installation, it is necessary to determine:
• Where the unit is to be installed.
• The vent system configuration to be used.
• Gas supply piping requirements.
• Electrical wiring requirements.
• Framing and finishing details.
• Whether optional accessories - devices such as a fan, wall switch, or remote control - are desired.
H
IGH
A
LTITUDE
I
NSTALLATION
For U.S. installation, units are tested and approved for elevations from 0-2000 feet. When installing this unit at an
elevation above 2000 feet, United States codes require a decrease of the input rating by changing the existing
burner orifice to a smaller size. Input should be reduced 4% for each 1000 feet above sea level. Check with the
local gas utility for proper orifice size identification. Consult your local gas company for assistance in determining
the proper orifice for your locality or refer to ANSI Z223.1-the latest edition, Appendix F.
I
NSTALLATION
P
REPARATION
7
This appliance has been converted for use at an altitude of
Orifice Size
Manifold Pressure
Input (Btu/hr)
Fuel Type
Date of Conversion
Converted By
53D9015. Rev 1 03/03
Summary of Contents for BBV400NE
Page 21: ...NOTES 21 53D9015 Rev 1 03 03 ...
Page 22: ...22 NOTES 53D9015 Rev 1 03 03 ...
Page 23: ...NOTES 23 53D9015 Rev 1 03 03 ...
