Mondolfo Ferro TBE160 MATIC, Operator'S Manual

Page: 91 / 274

- E
nGlISH
- Operator's manual 91
ACOUSTIC SIGNALS
In all operating modes, the display emits the acoustic signals specified in table 3:
Acoustic signal Meaning Action
1 short beep Confirm by pressing the
- set/cancel memory button
and
- select inches/mm button
None.
2 short beeps Not used None.
1 short beep +
1 long beep
Confirm.
The action that was taken
was successful.
None.
3 short beeps Failed.
The action was not
completed successfully
or the requested action is
not permitted.
Repeat the action after
changing the machine
parameter being used
or perform a permitted
action.
Slow continuous flashing Special operating mode
active.
Used in SETUP MODE (for
example for calibration)
to call attention to the
fact that a special,
potentially dangerous
operating mode is active.
Table 3 – Acoustic signals
LUMINOUS-ACOUSTIC INDICATOR
The luminous-acoustic indicator, which is located on top of a rod next to the electrical
board, is activated by the machine each time potentially dangerous manual or automatic
commands are executed. The indicator has a flashing orange light.
The following commands activate the acoustic-luminous indicator:
Turntable opening/closing;
Turntable lifting/lowering;
Tool arm + bead breaker disc lifting/lowering;
Bead breaker disc tangency;
Tool tangency;
Side To Side.