11
4.3 LASER Mode
The Laser Mode is only available when the Laser Module is installed.
This mode uses the LASER to trigger the strobe
fl
ash and is similar to
the External Input Mode.
Laser icon will blink when Laser Mode is enabled and be on
solid when trigger is pulled and laser is on.
By pulling the trigger and aiming the laser at a re
fl
ec ve target on
the rota ng or reciproca ng machine, the strobe will
fl
ash each me
a re
fl
ec on is received allowing the user to virtually “stop mo on”.
On-Target icon will show in display when target is detected by laser
The flash rate (speed) will be displayed in the selected units.
Figure 7 Using the Laser Module
3600
RPM
TACH
CAUTION:
x
AVOID EXPOSURE—LASER RADIATION IS EMITTED FROM
THIS APERTURE
x
AVOID DIRECT EXPOSURE TO BEAM
x
DO NOT STARE DIRECTLY AT THE LASER SOURCE
x
NEVER VIEW THROUGH OPTICAL INSTRUMENTS
4.4 TACH (Tachometer) Mode
The TACH (Tachometer) Mode requires the Laser Module to be
installed OR an external input (sensor) be plugged in. This mode
uses the Laser or External signal to measure rota onal speed.
Tachometer icon will show in display when the Nova-Pro
is in TACH Mode.
Unit will NOT FLASH in Tachometer Mode.
Laser icon will blink when Laser Mode is enabled and be on
solid when trigger is pulled and laser is on.
External icon will show in display when there is an external
sensor plugged into the Nova-Pro.
Pull the trigger and aim the laser (or external sensor)
at a re
fl
ec ve target. The speed will be displayed in the
selected units.
On-Target icon will show in display when target is detected.
The TACH can be configured to trigger on the positive or negative edge of
the incoming pulse from the external input (MENU-MISC).
Refer to Figure 7 Using the Laser Module and associated warnings.
12
3600
RPM
TACH
www.
GlobalTestSupply
.com
Find Quality Products Online at:
