5.1 Menu Overview
To enter the menus, press the MENU
bu on once or three
mes depending on the current mode (see overview) un l the word
SEtUP
appears on the top line of the display. To select the current
item shown on the lower line press the MENU bu on again. Not all
items will be available in the menu; it depends on the opera ng
mode.
Once in the Setup menu:
Use the
c
and
d
arrows on the joys ck to scroll through the
di
ff
erent available menu op ons.
Press the MENU bu on to enter menu op ons and make
selec ons.
Press the POWER bu on to escape or back out of the menus.
On-Target icon will show which menu op on is selected.
The following sec ons describe the individual submenus.
5.2 MODE Menu
MODE choices are:
StrobE, On
(Lamp)
tACH
(Tachometer), or
LASEr
(if Laser Module installed).
Press the MENU
bu on to enter the MODE menu. The top
line will show the mode and the On-Target
indicator will
be on for the currently selected mode.
Use the
c
and
d
arrows on the joys ck to select the desired
mode.
Press the MENU bu on to select the desired mode. This will
change the mode and exit the menu.
Press the POWER bu on to escape
without changing
the mode.
5.3 Brightness (BRITE) Menu
Refer to Sec on 8 for details on Brightness and Flash Dura on before
using this feature.
The Brightness (BRITE) menu op on sets the
fl
ash dura on which a
ff
ects
the brightness. Flash dura on can be adjusted in degrees of rota on
(propor onal
fl
ash dura on—changes with
fl
ash rate) or me in
milliseconds (msec—
fi
xed
fl
ash dura on). The
fl
ash dura on will be set
by the last
fl
ash dura on value adjusted. If you adjusted degrees, the
strobe will have a
fl
ash dura on in degrees propor onal to the
fl
ash
rate. If the adjustment was in me, the strobe will have a
fi
xed dura on
irrespec ve of the
fl
ash rate.
This is a live adjustment—if the trigger is depressed, the e
ff
ect of
changing the brightness can be seen immediately.
5.3.1 Degrees
Press the MENU
bu on to enter the BRITE menu. The
current
fl
ash dura on will be shown in degrees.
Use the arrows on the joys ck to adjust the
fl
ash dura on
in degrees - refer to sec on 5.1.1. Degrees can be set
from 0.1° to 10°.
Press the MENU
bu on followed by the Power bu on
to save the degree se ng.
16
www.
GlobalTestSupply
.com
Find Quality Products Online at:
