loca on. The current
fl
ash rate will then be shown in that
loca on.
To exit without saving a value press the POWER bu on .
5.5.2 Recall
Memory
To RECALL a saved strobe se ng:
Once in the Memory (MEMRY) menu, make sure the you
are in the Recall Mode as indicated by RM on the display.
Use the
c
and
d
arrows on the joys ck to select one of
the memory loca ons from which to load the se ngs—
RM1, RM2...RM10.
Press the MENU bu on followed by the Power
bu on to recall the se ng from the selected loca on.
To exit without recalling a memory loca on press the
Power
bu on .
5.6 JOG Menu
This menu op on is only valid in the
STROBE Mode
with
NO Exter-
nal Input
. Refer to Sec on 7 for details on DELAY before using this
menu item. All delays are rela ve to the current
fl
ash rate.
Press the MENU
bu on to enter the JOG menu. The current
se ng will be shown and the On-Target
indicator will be on
for the currently selected value.
Use the arrows on the joys ck to select the desired Jog method.
The op ons are: NONE, PHASE, and TIME.
Press the MENU
bu on to select a Jog method. This will
enter the sub-menu for PHASE or TIME.
21
5.6.1 NONE
To cancel the JOG mode, press the MENU
bu on
when NONE is displayed.
5.6.2 PHASE
To Jog by PHASE, press the MENU
bu on when PHASE is
displayed.
The phase value will be shown in degrees. Use the joys ck to
set the desired value (refer to sec on 5.1.1). Phase can be set
from -360.0° to +345.0°.
Press the MENU
bu on to accept and exit.
5.6.3 TIME
To Jog by TIME, press the MENU
bu on when TIME
is displayed.
The me value will be shown in milliseconds. Use the joys ck
to set the desired value (refer to sec on 5.1.1). Time can be set
from -50.000 mSec to +50.000 mSec.
Press the MENU
bu on to accept and exit.
To exit the JOG Menu, press the Power bu on .
5.7 DELAY Menu
This menu op on is only valid in the
STROBE Mode
with an
External
Input
or in the
Laser Mode
. Refer to Sec on 7 for details on DELAY
before using this menu item. All delays are rela ve to an external
trigger which may be derived from the internal laser or external
input.
22
www.
GlobalTestSupply
.com
Find Quality Products Online at:
