5.3.2 Time
To set the
fl
ash dura on in me instead of degrees, press the
MENU bu on again (skip the DEG menu).
Use the arrows on the joys ck to adjust to the me value.
Time can be set from 0.001 mSec to 1.000 mSec.
Press the MENU
bu on followed by the Power bu on
to save the me se ng.
5.4 Miscellaneous (MISC) Menu
This menu item contains seldom used op ons. The miscellaneous
items are: DECPT (Decimal Point), UNITS, INPUT, OUTP (Output) and
BKLIT (Backlight).
Press the MENU
button to enter the MISC menu.
Use the
c
and
d
arrows on the joys ck to scroll through the
miscellaneous op ons.
Press the MENU bu on to select the desired op on.
Press the POWER bu on to exit/escape.
5.4.1
DECPT (Decimal Point) Menu
The Decimal Point menu adjusts the resolution of the Flash/Tach
rate displayed. Up to three places after the decimal point can
be shown. The number of decimal places is limited by the
6-digits available and the unit will auto range to show the
maximum number of digits after the decimal point selected by
the user. The choices are NONE, 1, 2, 3. A value of 600 will be
displayed as 600, 600.0, 600.00, 600.000 depending on the
se ng.
17
Press the MENU
bu on to enter the DECPT menu.
The current value is shown on the top line with DECPT on the
lower line. The On-Target
indicator will be on for the
currently selected value.
Use the arrows on the joys ck to select the desired value.
Press the MENU bu on followed by the Power bu on
to save the decimal point se ng.
To exit without se ng the decimal point press the Power
bu on.
5.4.2 UNITS
Menu
This menu op on selects the Engineering Units used to display
the
fl
ash rate or speed. The choices are:
FPM - Flashes per Minute (Not available in TACH Mode)
FPS - Flashes per Second (same as Hz, not available in TACH Mode)
RPM - Revolu ons per Minute
RPS - Revolu ons per Second (same as Hz)
Press the MENU
bu on to enter the UNITS menu. Unit
is shown on the top line with the current engineering unit on
the lower line. The On-Target indicator will be on for the
currently selected value.
Use the arrows on the joys ck to select the desired value.
Press the MENU bu on followed by the Power
bu on to save the value.
To exit without se ng the units press the Power bu on.
18
www.
GlobalTestSupply
.com
Find Quality Products Online at:
