(0 to 60 RPM). This gives a “slow-motion” effect and enables the
target to be examined as it moves through a complete cycle or
revolution. The display will show the
AUTO
icon to indicate the
Delay Mode with the virtual speed in RPM on the top line and
will indicate VRPM (Virtual RPM) on the lower line. In the Menu,
the adjustments happen in
real time
, so if the strobe is flashing
the user can view the effect of changing the virtual RPM.
NOTE: Turning the power o
ff
will reset the delay modes.
8. BATTERY
PACK
When ordered as such, the Nova-Pro comes with one two
rechargeable Lithium Ion ba ery pack(s), external charger
and power supply. The Ba ery Pack is shipped in a mostly
discharged state and has tape over the terminals.
REMOVE TAPE BEFORE USE.
CHARGE BATTERY PRIOR TO USE.
CAUTION:
x
Do not store ba ery in hot loca ons.
x
Do not expose to
fi
re.
x
Do not disassemble.
x
Do not apply mechanical force.
REMOVE Ba ery Pack from unit before storing for long periods.
DO NOT DISPOSE of the Lithium-Ion ba eries as unsorted municipal
waste. The ba eries need to be RECYCLED in accordance with local
regula ons. The ba eries should be sent to a recycling center or
returned to the factory using appropriate shipping methods.
29
The Nova-Pro Ba ery Pack is speci
fi
cally keyed to
fi
t in the Nova-Pro and
Charger Base one way only. Insert the Ba ery Pack into the Nova-Pro
un l the clips lock into place. To remove, squeeze clips on the Ba ery
Pack to release from the Nova-Pro.
8.1 Low Ba ery Func onality
Low ba ery icon will blink when ba ery pack needs to be
recharged. The unit may s ll be used for a short me.
The Nova-Pro will display “LOBAT” and shut down when the ba ery
pack is exhausted and must be recharged.
8.2 Charging the Ba ery Pack
The Nova-Pro Ba ery Pack must be
removed from the Nova-Pro to be charged
using the Nova-Pro Charging Sta on and
power supply provided.
CAUTION: Never a empt to charge the
Ba ery Pack with anything other than
the Charging Sta on and power supply
provided with the Nova-Pro.
The Nova-Pro Charging Station has an light emitting diode (LED) that
indicates the state of the battery/station. The LED indicates the following:
Green
On / No Ba ery or Ba ery Charged
Red
Charging
Flashing Red
Error / Replace Ba ery
Ba ery charge me will be up to 6 hours depending on Ba ery Pack
and residual charge. Once the ba ery is charged the charger will
switch to trickle charge mode—the ba ery should be removed once
the charge LED turns green.
30
LED
Power
Supply
Input
Key
www.
GlobalTestSupply
.com
Find Quality Products Online at:
