2
1
Warnings and cautions
Risks of electrical shocks and fire
For safe installation and efficient performance of this system, read the instruction
manual thoroughly and keep it handy.
• Where applicable, installation must meet requirements of the following codes:
- Canadian Electrical Code (CSA C22.1 Part 1);
- National Electrical Code (NFPA 70);
- Any other applicable local and/or national code.
• Where required by law, this product must be installed by a qualified individual.
• To prevent any possibility of electrical shocks, the power supply must be turned off
before handling the heating cables.
• A GROUND FAULT PROTECTION DEVICE MUST BE USED WITH THIS PRODUCT,
UNLESS EXEMPTED BY ELECTRICAL CODE IN FORCE.
• This heating cables must be used for indoor applications only.
• This heating cables must be installed and fully embedded in cement or an
equivalent binder (cement glue, ceramic glue or self-levelling cement).
SAVE THESE INSTRUCTIONS
