12
7.4 Marking the floor
• On the floor of an empty room (under construction or major renovations), draw the location of stationary
elements (toilet, bath, shower, counters, drawers, permanent furnishings) that will be installed later. These
marks will outline the heating area to ensure the heating cable system is not placed under these stationary
elements;
• The floor temperature sensor must be centered between two parallel heating cables. The ideal location is
one where it is likely to be away from stationary objects and sheltered from outside influences (sunlight)
that could skew floor temperature readings. For maximum comfort, the area above the sensor must be free
of obstruction.
Figure 4
Figure 5
