18
7.8 Connecting the system
Cold lead
240V/208V connection:
120V connection:
Line 1 – Black Sheath
Line – Black Sheath
Line 2 – Red Sheath
Neutral – Yellow Sheath
Bare wire – Ground
Bare wire – Ground
Final view
The system must be connected by a master electrician.
6) Fifth insulation and resistance test.
Before wiring system, measure the cable’s electrical resistance
and record the readings on line 6) Before wiring system.
Self-levelling
cement
cement glue
floor
covering
IMPORTANT!
Figure 11
5) Fifth insulation and resistance test.
After final surfacing. Once the cement or binder has been applied
and completely dried, measure the cable’s electrical resistance and
record the readings on line 5) After final surfacing.
