Molten Rock Equipment Ltd. www.moltenrock.co.uk
Page 20
DIAGNOSTICS
This section is intended to offer quick checks
on how to get your Boma going if you have a
problem.
If the issue is not resolved through the
following information then please contact
Molten Rock.
PROBLEM
POSSIBLE SOLUTIONS
Boma will not move
Check all plugs are in place.
Press switch to on position.
Re-charge batteries.
Trip reset fuse blown
Depress both trip reset fuses fully, if the fuse continues to trip
CONTACT MOLTEN ROCK before continuing
Ride is rough
Follow instructions in rox shock manual to tone suspension to suite
rider.
Boma struggles to climb or tow
Power switch is on LOW, switch power switch to high. NOTE! Ensure
all safety guidelines laid out within this manual are adhered to.
Brakes do not seem effective
Check wear levels on the brake pads.
Ensure that disc is firmly located between brake pads.
Brakes need adjusting/bleeding.
True Charge
The true charge can be used to diagnose
problems with the controls of the Boma. Below
is the standard light sequences shown with
selected faults.
! WARNING
If you are unable to resolve a problem
with your Boma by following the advice
in this section, do not attempt to fix or
repair the Boma. See advice from a
member of the Molten Rock Team.
