Molten Rock Equipment Ltd. www.moltenrock.co.uk
Page 10
PRE-RIDE INSPECTION OF BOMA
Check the following items before operating:
Wheels/frame
Ensure all cables, brackets and fasteners have
been correctly assembled. If you are in any
doubt, consult this manual or contact Molten
Rock Equipment Ltd. directly.
Tyres
Use a gauge to check the air pressure (Front;
40PSI, Rear; 25PSI). Adjust if needed. Also look
for signs of damage or excessive wear.
Batteries
Check both battery fuses are intact. Check
battery charge level. Ensure batteries are
mounted to the Boma correctly and securely
fastened and connected. Check plug for signs of
damage.
Nuts & Bolts
Check all wheel nuts are tight. Ensure all
steering elements are fastened and in good
condition.
Cables
Check all cables for signs of wear. Check the
fittings for looseness. Replace or tighten as
needed.
Lights
Make sure all lights are working (where
applicable). Check reflectors are all in place and
have no cracks.
Brakes
Squeeze the front brake lever. Check the front
wheels lock and that there is no break fluid
leaking. Check that rear wheel brakes are
attached and work correctly.
Suspension
Check all mountings are tight. Check for any oil
leaks or damage.
Steering
Check that the wheels turn properly as you
steer the handlebar. Move the handle bar right
and left and check that there is no excessive
backlash.
Drawbar (if fitted)
Check drawbar is fitted correctly and the
trailer is coupled properly. Make sure
that you do not exceed the loading limits.
Check trip reset fuse
Press both Trip reset fuses in fully.
IS THE BOMA READY TO RIDE?
Before each ride, it is important to inspect
your Boma and make sure any problem
you find is corrected. A pre-ride inspection
is a must, not only for safety but because
having a breakdown or a puncture can be a
major inconvenience.
If your Boma has been involved in any
form of accident or collision, do not use
your Boma until is has been inspected by a
member of the Molten Rock Equipment
team. There may be damage or other
problems that you cannot see.
! WARNING
Improperly maintaining your Boma or
failure to correct the problem before
riding can cause a crash in which you can
be seriously hurt or killed.
Always perform a pre-ride inspection
before every ride and correct any
problems.
