Docon
®
7
Product description
Page 27 of 74
To mount the table on the case, firstly insert the aluminium section into the duct on the
bottom part of the case (see
). Now push the black clamp connection down to the
case section and tighten by hand. Ensure that the projection on the connection is inserted
correctly in the case section. Then place the table top on the aluminium section and also
hand-tighten using the star-shaped knob.
Figure 19: Docon 7 table
Docon 7 tube holder
As described above, the tube holder is attached directly to the Docon 7 table. The sealing
handle and blood tubes etc. can be safely stored in it.
Figure 20: Docon 7 tube holder
