Molift Rail System, Project Planning And Installation

Page: 6 / 112

Explanation of symbols
This symbol is used to point out instructions and information related to work place safety where
injury may occur if the information is disregarded or ignored. Follow these instructions, be care-
ful and attentive at all times.
This symbol indicates important information regarding the use of the equipment. If not taken
into consideration, it may lead to damage or functional defects to the lifter or other equipment.
Responsibility
Molift Group AS assume no liability for damage or malfunctions resulting from failure to comply
with the instructions in this handbook. Warranty claims must be made immediately on detecting
the defect. Consumable parts are not subject to the warranty.
All technical information, data and instructions contained in this handbook were up-to-date at
time of print and are compiled on the basis of our experience and to the best of our knowledge.
We reserve the right to incorporate technical modifications within the scope of further develop-
ment of the product described in this manual. No claims can be derived from the information, il-
lustrations or descriptions contained in these instructions. We assume no liability for any dam-
age or malfunction caused by operating errors, non-compliance with the mounting instructions
or inappropriate maintenance. We expressly point out that only genuine Molift spare parts and
accessories approved by us may be used. For safety reasons, the fitting and use of spare parts or
accessories, which have not been approved, and unauthorised modification or conversion of the
product, are not permitted. Molift Group AS will accept no liability for damages resulting from
such acts.
With the exclusion of product liability, Molift Group AS is liable for faults or omissions on its part
within the scope of the warranty obligations stated in the purchase contract. Claims for damages
are excluded, irrespective of the legal reason from which such claims are derived. Only documen-
tation belonging to the actual equipment is valid.
Any failure to comply with the safety regulations and precautionary measures stated in these op-
erating instructions renders the declaration of conformity supplied with the system in accordance
with Council Directive (93/42/EEC) concerning medical devices invalid.
Page 4 of 106 How to use this manual Rev E 10/2011
Explanation of symbols