PRODUCT SPECIFICATION
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
REVISION
DESCRIPTION REVISED
APPLICATION SPECIFICATION FOR
PICO-LOCK1.0 W/B SINGLE-ROW R/A SMT GOLD PLATING
CHANGE NO.
640538
REVISED BY
QHE31
DATE
2018/03/22
DOC TYPE
DOC TYPE DESCRIPTION
DOC PART
SERIES
REV APPR BY KOMURAKAMI
DATE
2020/07/07
PS
ENGINEERING SPECIFICATION WORD
001
503764
INITIAL RELEASE
CUSTOMER
DOCUMENT NUMBER
REVISION
SHEET
INITIAL DRWN TYAJIMA01
DATE
2013/09/20
GENERAL MARKET
AS-503764-001
B
23
OF
51
INITIAL APPR
NUKITA
DATE
2013/09/27
TEMPLATE: 2090580003-PPS-A4 Rev A2 2020 / 04 / 05
9-2
．
Un-mating process method
Please hold wires all together lightly. After releasing lock completely attaching fingers at pushing
both bar for releasing lock using flat part of finger, please withdraw receptacle housing gradually,
axially and straightly. And please avoid withdrawing them diagonaly and roughly. That might
cause break of connector.
※
Please do not withdraw with holding only particular a few wires. As excessive force
concentrates at particular terminals, connector might be damaged or terminal might come out.
※
When releasing lock, Please push bar for releasing lock with flat part of finger not only
fingertip(nail tip). If nail is long, nail might catch lock protection wall.
Instruction
Withdrawal direction
Release of lock
