PRODUCT SPECIFICATION
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
REVISION
DESCRIPTION REVISED
APPLICATION SPECIFICATION FOR
PICO-LOCK1.0 W/B SINGLE-ROW R/A SMT GOLD PLATING
CHANGE NO.
640538
REVISED BY
QHE31
DATE
2018/03/22
DOC TYPE
DOC TYPE DESCRIPTION
DOC PART
SERIES
REV APPR BY KOMURAKAMI
DATE
2020/07/07
PS
ENGINEERING SPECIFICATION WORD
001
503764
INITIAL RELEASE
CUSTOMER
DOCUMENT NUMBER
REVISION
SHEET
INITIAL DRWN TYAJIMA01
DATE
2013/09/20
GENERAL MARKET
AS-503764-001
B
10
OF
51
INITIAL APPR
NUKITA
DATE
2013/09/27
TEMPLATE: 2090580003-PPS-A4 Rev A2 2020 / 04 / 05
【
4. The confirmation item of crimping wire
】
4-1
．
The appearance before crimping.
When using the loose terminals products before crimping, please make sure that there is no
deformation of the crimp Terminal.
If you have something caught between the terminals, please do not remove them forcibly.
Please refer to sales drawing (5037650000-SD PSD 000) for product form and its dimensions.
4-2
．
The appearance after crimping.
Shows the after crimping confirmation item as follows. Please refer to ATS for specified crimp height,
pull testing, and applicable wire specifications.
①
No visible terminal damage.
②
No visible spring contact area damage or deformation.
③
All wire strands are in conductor barrel.
④
The insulator
part of the electric wire is located wire barrel and insulation barrel midway.
⑤
No damage with terminal lance.
⑥
No damage with appearance.
（
Dirt / foreign objects
）
4-3
．
The non-conformity item.
Please warn the arrival crimping delinquent to show as follows in particular.
It affect the insertion work and affect a product function.
②
Bend up
This makes difficult to insert the terminal into the housing and may cause terminal butting,
decrease of terminal retention force or contact failure.
×
No Good
①
②
③
④
⑤
