PRODUCT SPECIFICATION
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
REVISION
DESCRIPTION REVISED
APPLICATION SPECIFICATION FOR
PICO-LOCK1.0 W/B SINGLE-ROW R/A SMT GOLD PLATING
CHANGE NO.
640538
REVISED BY
QHE31
DATE
2018/03/22
DOC TYPE
DOC TYPE DESCRIPTION
DOC PART
SERIES
REV APPR BY KOMURAKAMI
DATE
2020/07/07
PS
ENGINEERING SPECIFICATION WORD
001
503764
INITIAL RELEASE
CUSTOMER
DOCUMENT NUMBER
REVISION
SHEET
INITIAL DRWN TYAJIMA01
DATE
2013/09/20
GENERAL MARKET
AS-503764-001
B
15
OF
51
INITIAL APPR
NUKITA
DATE
2013/09/27
TEMPLATE: 2090580003-PPS-A4 Rev A2 2020 / 04 / 05
【
6. Harness processing (crimping wire insertion method in Receptacle housing)
】
Show insertion procedure and instructions (
※
) of the crimping wire as follows.
6-1
．
Insertion crimping wire
①
Hold receptacle housing by pinching right and left side.
②
Please pick up the cable at about 10mm position from the crimp-end with a finger lightly.
※
It might be hard to insert terminal so that wire is easy to bend if wire is picked at distance
from terminal.
※
Distance value depends on wire guage, UL style, etc. Please confirm it with the wire that
you chosen before you use it.
③
Picking with terminal lance part toward center of receptacle housing, please insert terminal slowly
and straightly till the tip of terminal touch housing (with force of around 1.6
～
2.4N).
（
Fig.6-1
）
Instruction
Fig. 6-1
Terminal insertion direction
