background image

CSM_XS5_DS_E_7_1

1

Round Water-resistant Connectors

XS5

Round Water-resistive Smartclick 
Connectors That Reduce Installation Work

• A newly developed lock mechanism that is compatible with round M12 connectors.

• Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock.

• A positive click indicates locking.

• Features the same degree of protection (IP67) as M12 connectors.

• A full line-up of models is planned.

• Connectors with Cables are UL approved.

Refer to 

Safety Precautions

 on 

page 17.

Ratings and Specifications

Recommended Cables for Assembly Connectors

Materials and Finish

Connection Combinations

Rated current

4 A

Rated voltage

250 VDC

Contact resistance 
(connector)

40 m

 max. 

(20 mV max., 100 mA max.)

Insulation resistance

1,000 M

Ω 

min. (at 500 VDC)

Dielectric strength 
(connector)

1,500 VAC for 1 min 
(leakage current: 1 mA max.)

Degree of protection

IP67 (IEC60529)

Insertion tolerance

50 times min.

Lock strength

Tensile: 100 N/15 s, Torsion: 1 N·m/15 s

Cable holding 
strength

100 N/15 s (for cable diameter of 6 mm)

Lock operating force

0.1 N·m to 0.25 N·m

Ambient operating 
temperature range

25 to 70

°

C

Cable outer 

diameter 

(mm)

Core sizes

Crimping 

models

Soldering 

models

Screw-on 

models

for 8 dia. 7 to 8 dia.

---

---

0.18 to 
0.75 mm

2

for 7 dia. 6 to 7 dia.

for 6 dia. 5 to 6 dia. Two types of 

contacts are 
available.
0.18 to 0.3 mm

2

0.5 to 0.75 mm

2

0.5 mm

2

 

max.

for 4 dia. 4 to 5 dia.

for 3 dia. 3 to 4 dia.

Item

Model

XS5F/H/W/R

XS5M/P

XS5C/G

Con-
tacts

Materials

Phosphor bronze

Brass

Finish

Nickel base, 0.4-

µ

m gold plating

Fixtures

Nickel-plated zinc alloy

Fixtures (Lock)

SUS

Pin block

PBT resin (UL94V-0)

O-ring

Rubber

Overmolding/
Cover

Polyester elas-
tomer

---

PBT resin 
(UL94V-0)

Cable

Vibration-
proof 
robot 
cable

UL CL3, 6-mm 
dia., 4 cores 

×

 

AWG20 (0.08/
110)

---

Oil-resis-
tant poly-
urethane 
cable

6 dia.
4 cores 

×

 0.5 mm

2

(0.12/45)

---

Seal resin

---

Epoxy resin
(UL94V-0)

---

Power supply 
wires

---

UL1007 AWG20 ---

 is a registered trademark of the OMRON Corporation.

OMRON model No.

Smartclick Plug Connectors

M12 Plug Connectors

XS5H, XS5G, XS5W (plug side),

XS5R (plug side), XS5M

XS2H, XS2G, XS2W (plug side), 

XS2R (plug side), XS2M

Smartclick Socket 
Connectors

XS5F, XS5C, XS5W (socket side), 
XS5R (socket side), XS5P



M12 Socket 
Connectors

XS2F, XS2C, XS2W (socket side), 
XS2R (socket side), XS2P



: Connected by twisting.

: Connected by screwing.

Note: The XS

@

M and XS

@

P cannot mate with each other.

Summary of Contents for Smartclick XS5C-DS Series



















Reviews: