Mohawk TR-33, Manual

Page: 9 / 87

MOHAWK MODEL TR-33/35/50/75/33WT/35WT/50WT/70WT
9
GENERAL INFORMATION
BEFORE INSTALLING A LIFT
x
BEFORE INSTALLING A MOHAWK LIFT REVIEW THE FOLLOWING ITEMS . EACH REPAIR SHOP BAY IS
DIFFERENT. IN AN ATTEMPT TO PREVENT OVERSIGHTS, ALL OF THE FOLLOWING INFORMATION MUST
BE VERIFIED.
WHAT ARE THE LIFT SPECIFICATIONS ?
THE SPECIFICATIONS IN THIS MANUAL ARE FOR A
STANDARD LIFT. ANY SPECIAL FEATURES WILL
BE INDICATED ON THE LIFT VERIFICATION SHEET.
USE THE LIFT VERIFICATION SHEET AND THE TR
33/35/50/75 DIMENSIONAL CHART TO VERIFY THE
UNITS SPECIFICATIONS AND SET-UP DIMENSIONS.
OVERHEAD OBSTRUCTIONS:
THE AREA IN WHICH THE LIFT WILL BE LOCATED
SHALL BE FREE OF OBSTRUCTIONS. HEATERS,
BUILDING SUPPORTS, ELECTRICAL CONDUIT. ALL
OF THESE ITEMS ARE TO BE (20 FT) TWENTY FEET
ABOVE THE BAY FLOOR
CONCRETE FLOOR:
VISUALLY LOOK OVER THE BAY FLOOR. THE LIFT
CAN NOT BE INSTALLED ON EXPANSION SEAMS,
OR CONCRETE THAT IS CRACKED. THE LIFT
CANNOT BE EXPECTED TO BE STRUCTURALLY
SOUND ON DEFECTIVE CONCRETE.
TEST DRILL THE FLOOR:
TEST DRILL THE FLOOR TO VERIFY CONCRETE
THICKNESS. TEST DRILL EACH BAY WHEN MORE
THAN ONE LIFT IS BEING INSTALLED.
FLOOR REQUIREMENTS:
THIS INFORMATION IS IN THE
GENERAL FLOOR
REQUIREMENTS.
POWER SUPPLY:
REFER TO THE LIFT VERIFICATION SHEET FOR
THE POWER SUPPLY SPECIFICATIONS.
BAY SIZE:
REFER TO
THE LIFT VERIFICATION SHEET AND
THE DIMENSIONAL CHART.
SPECIFICATIONS:
REFERENCE ALL SPECIFICATIONS PRIOR TO
INSTALLING THE LIFT.
IMPORTANT
x
ALL INFORMATION, ILLUSTRATIONS, AND SPECIFICATIONS IN THIS MANUAL ARE
SPECIFIC TO MOHAWK MODELS TR-33, TR-35, TR-50, TR-75. WE RESERVE THE RIGHT TO
MAKE CHANGES AT ANY TIME WITHOUT NOTICES.
x
ALWAYS REFER TO THE LIFT VERIFICATION SHEET AND THE TR 33/35/50/75
DIMENSIONAL CHART. SPECIFIC INFORMATION PERTAINING TO THIS LIFT IS FOUND ON
THESE PAGES.