6
Service Procedures
22
Blue Seal Evolution Series Gas Salamander
© Copyright Moffat Ltd. 9 February 2016
Amendment 9
1) Remove the side panel (Refer Item 6.1.2).
2) Remove the burner guard by pulling it down from the centre
fastenings and then removing it from the mounting holes in
the side wall.
3) Remove the two centre fixing screws and remove the centre
bracket.
4) Whilst holding the burner, remove the two screws located
in the control area which fix to the burner flange. The
burner can now be removed.
5) Replace the burner and re-assemble in reverse order.
Figure 6.2.4c
6.2.4b Main Burner (From Ser No.
401965)
Two Screws
Figure 6.2.4d
Two
Screws
6.2.5a Main Burner Injectors
(Up to Ser No.
401964)
1) Remove the side panel (refer 6.1.2).
2) Unscrew the main burner injector.
3) Clean or replace injector and re-assemble in reverse order.
NOTE: It is important that the injector aligns centrally
with the burner venturi.
1) Remove the side panel (Refer Item 6.1.2).
2) Unscrew and remove the main burner injector.
3) Clean or replace injector and re-assemble in reverse order.
NOTE: It is important that the injector aligns centrally
with the burner venturi.
Injector
Figure 6.2.5a
Figure 6.2.5b
Injector
6.2.5b Main Burner Injectors
(From Ser No.
401965)
