2
Installation
10
Blue Seal Evolution Series Gas Salamander
© Copyright Moffat Ltd. 9 February 2016
Amendment 9
Commissioning
1.
Before leaving the new installation;
a. Check the following functions in accordance with the operating instructions specified in the 'Operation' section of the User
manual.
Light the Pilot Burners.
(Up to Serial No 401964 Only).
Light the Main Burners.
Check the Low Fire burner operation.
Check the High Fire burner operation.
Check the Racking System operation.
b. Ensure that the operator has been instructed in the areas of correct lighting, operation, and shutdown procedure for the
appliance.
2.
The User manual must be kept by the owner for future reference, and a record of
Date of Purchase,
Date of Installation
and
Serial Number of Unit
recorded and kept with the manual.
(These details can be found on the Rating Plate
attached to the R/H side panel (refer to the 'Gas Connection' section).
NOTE:
If it is not possible to get the unit to operate correctly, shut off the gas supply and contact the supplier of this unit.
