MODULARWALLS Slimwall Classic Post, Installation Manual

Page: 22 / 36

STEPPING METHOD 2 – RAKE/CUT YOUR BOTTOM PANEL TO THE SLOPE USING 1800MM WORTH
OF WALL PANELS
You will maintain a maximum height of 1800mm wall height – As pictured below it should be noted that your
wall height at the high side of the slope will be reduced by the amount of the rake – in this situation 100mm.
1700-1800mm High wall shown
Insert post infill here
Insert post infill here
Example of a 100mm fall over
this distance
Cutting of a panel to suit a 100mm rake / slope
Cut panel to suit the slope of the ground
N.B On a larger rake / slope a longer basel channel may be required
Cut
800
900
1800
17
00
100
Support bracket height
= Normal placement for
a 1800mm wall on both
sides of the post
ADDITIONAL
STEPPING OR RAKING YOUR WALL
22 SLIMWALL™ INSTALLATION GUIDE