STEP 2: POSTS
FIXING THE BASE BRACKETS TO THE POST
Attach the panel support bracket into the post with the hex head screws supplied. The measurement from the
top of the post should be your final wall height plus 3mm. This 3mm will allow for panel joins plus the thickness of
the capping channels.
Example: an 1800mm high wall will have the brackets set at 1803mm from the top of the post.
1803mm
Support bracket
1800mm
USING EXPRESSED JOINTS?
If you are using the Expressed Joint feature, please refer to
page 19
for specific bracket instructions.
INSTALLING ON SLOPING GROUND?
If you are stepping or raking your wall on sloping ground, please refer to
page 20
for specific brackket
instructions.
SLIMWALL™ INSTALLATION GUIDE
9
Summary of Contents for Slimwall Classic Post
