7
WIRELESS ROUTER ADSL
2.5 Connect Related Devices
1) Connect Router to LINE Plug the provided RJ-11 phone cable into LINE port on the back panel of the router and in-
sert the other end into splitter or wall phone jack.
2) Connect Router to LAN Plug RJ-45 Ethernet Cable into LAN port on the back panel of the router and insert the other
end of the Ethernet cable on your PC’s Ethernet port or switch / hub.
3) Connect Router to Power Adapter Plug Power Adapter to PWR port on the back panel of the router and the other
end to a power outlet.
4) Press ON/OFF button to start the router
Warning! Only use the power adapter provided in the package, otherwise it may cause hardware damage.
3. Connecting Wireless ADSL2+ Router via
Ethernet
Your router can be managed from anywhere with the embedded Web confi guration using a Web browser, such as
Microsoft Internet Explorer or Netscape Navigator. Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later
versions with JavaScript enabled should be used. A screen resolution of 1024 by 768 pixels is recommended.
3.1 Setup Wireless ADSL2+ router via Ethernet Cable
If there is an available LAN card present on your PC, you just simply connect ADSL router and PC through the Ethernet
cable. Once you establish Internet connection, you could browse the Web through the Ethernet cable.
3.2 Confi gure TCP/IP
For Windows 98SE and ME
Step 1: Click Start then Settings and choose Control Panel
Step 2: Double click Network icon.
Step 3: Select Confi guration tab, then choose TCP/IP from the list of installed network Components and click Properties
button.
Step 4: You can setup the following confi gurations in two methods:
