P/N 330654-E 01/2018
COPYRIGHT ©
Dansensor A/S
22
User Guide
EN
Lippke 4000/4500
How does it work?
1. Adjust the restraining height - see "Adjusting the restraining height (ASTM)" on page 23 for details.
2. Open the restraining plates
by sliding them away from each other.
3. Prepare the package
with a septum
and place it on the base plate
.
4. Move the test head
downwards to penetrate the package
making sure that the needle
is
fully seated onto the septum
.
5. Close the restraining plates
. Lock the test head in the current position taking into consideration
that it should be allowed to move upwards as the package inflates.
If, for some reason, you want to restrict the test head movement, you can do this by means of the
knob
.
6. Perform the test.
5
6
7
1
1
2
3
4
Summary of Contents for Dansensor Lippke 4000
