Dansensor A/S
COPYRIGHT ©
P/N 330654-E 01/2018
Lippke 4000/4500
EN
User Guide
21
Setting Up
1. Mount the nut
and the washer
on the vertical rod
, then screw the rod into the base plate
as far as it goes. Tighten assembly by screwing the nut
against the base plate
.
2. Fit the two handles
and
to the connector rod
and slide it onto the vertical rod
. Tighten
the handle
to position the connector rod
on the vertical rod
.
3. Fit the needle
and the filter
(if any) on the test head
, then insert test head into the
connector rod
and tighten handle
to keep it in position.
CAUTION! Filters and needles should only be hand tightened - do not use any tools.
4. Connect air supply (Feed) and pressure measurement (Sense) hoses
to the Lippke 4000/4500
device - see page 53 for details.
Sense
Feed
7
3
6
5
1
2
4
8
9
10
11
Summary of Contents for Dansensor Lippke 4000
