Mocon AMETEK Dansensor Lippke 5000, User Manual

Page: 56 / 136

54 User Guide EN Dansensor
®
Lippke
®
5000
P/N 380419-C
05/2022
Correct use of hose connectors
Follow procedures below to ensure correct and tight hose connections:
Connectors with union nut
1. Unscrew the union nut

from the hose connector

and slide it onto the hose

.
2. Press the hose

onto the hose connector

as far as it goes.
3. Finally slide the union nut

onto the hose connector

and tighten properly.
Push-in connectors
1. Push the hose

into the fitting

as far as it goes. Check the connection by pulling the
hose slightly outwards.
2. To disconnect the hose, push down on the sleeve

to release the hose, then pull the
hose out of the connector.