Mocon AMETEK Dansensor Lippke 5000, User Manual

Page: 131 / 136

Dansensor
®
Lippke
®
5000 EN User Guide 129
P/N 380419-C
05/2022
Appendix
Safety and Handling Instructions
WARNING! Personnel operating and maintaining the device must be familiar with
all aspects of its operation and be proficient in maintenance.

Such personnel should review the following precautions to promote safety
awareness.

Failure to follow the safety instructions could result in fire, electric shock, injury, or
damage to the Dansensor®
Lippke ® 5000 or other property.
NOTE! The manufacturer cannot be held responsible for any damage caused by
incorrect installation, operation or maintenance of the device.

Installation

To ensure the best installation with the least technical problems, please install equipment
as described in this manual.

Only operate the system with the mains voltage indicated on the nameplate.

Never install the equipment in explosive environments.

Always use correct fittings when connecting compressed air to the device.

Provide adequate space around the equipment for proper ventilation.

The units are Class 2 appliances and thus do not require an earthed mains connection.

It is the responsibility of the owner and operator(s) of the equipment, that the installation is
made in accordance with local rules and regulations.
Handling and maintenance

Be sure to disconnect compressed air supply hoses and electrical power cables before
performing any cleaning or maintenance.

All panels and protective guards must be in place before operating the equipment.

When operating or maintaining the equipment always obey the relevant rules and
regulations for workers safety.

Never block gas outlets.

Handle the device with care. It is made of metal, glass, and plastic and has sensitive
electronic components inside.

The device can be damaged if dropped, burned, or crushed, or if it comes in contact with
liquid.

Do not use a damaged device, such as one with a cracked screen, as it may cause injury.

Do not cover the device with a cloth or piece of plastic to protect it from dust, as this
prevents free air circulation around the device and might lead to overheating.

Do not expose the device to heavy moisture or heat and keep it away from direct sunlight.