Mocon AMETEK Dansensor Lippke 5000 User Manual Download Page 19

Page: 19 / 136

Dansensor

Lippke

5000

User Guide

P/N 380419-C

05/2022

How does it work?

1. Prepare the package



with a septum



and place it on the base plate



2. Move the test head



downwards to penetrate the package



making sure that the

needle



is fully seated onto the septum



. Lock the test head in this position taking

into consideration that the test head should be allowed to move upwards as the package
inflates.



If, for some reason, you want to restrict the test head movement, you can do this by means
of the knob



3. Perform the test.

Summary of Contents for AMETEK Dansensor Lippke 5000









































































































































Search results

Summary of Contents for AMETEK Dansensor Lippke 5000

Reviews:

Related manuals for AMETEK Dansensor Lippke 5000

Brands by name

Popular brands

Mocon AMETEK Dansensor Lippke 5000, User Manual

Search results

Summary of Contents for AMETEK Dansensor Lippke 5000

Reviews:

Related manuals for AMETEK Dansensor Lippke 5000

Brands by name

Popular brands