Mocon AMETEK Dansensor Lippke 5000 User Manual Download Page 14

Page: 14 / 136

User Guide

Dansensor

Lippke

5000

P/N 380419-C

05/2022

Supplied Parts

The following items are included with the device:



Power supply cable (5 pcs.)



For connecting the power supply



to a main power outlet.



Below is an overview of which cable is to be used in which countries/areas*:



type:

Europe

type:

North America, Thailand, Taiwan

AUS

type:

Australia, New Zealand

type:

United Kingdom, Singapore, Malaysia

CHN

type:

China

* Compatibility is not limited to the indicated countries/areas.



Power Supply



Supplies the appropriate supply voltage to the device. Use appropriate cable



connect the power supply to the main power outlet.



Noise filter



For the package pressure exhaust outlet.



Air supply hose



For connection of compressed air.

"64

$)/

Summary of Contents for AMETEK Dansensor Lippke 5000









































































































































Search results

Summary of Contents for AMETEK Dansensor Lippke 5000

Reviews:

Brands by name

Popular brands

Mocon AMETEK Dansensor Lippke 5000, User Manual

Search results

Summary of Contents for AMETEK Dansensor Lippke 5000

Reviews:

Brands by name

Popular brands