•
Insert the M12 control cable for the CamIO
from below into the turn/tilt unit of the cam-
era. Remove the blue plug labeled
RS-232
from the insect protection. Connect the HD 15
connector to the M12.
•
Make sure that the camera's insect protection
remains firmly in place. Reinstall the
bottom
cover
of the mount.
•
Insert the Ethernet cable and the M12 control
cable from below into the turn/tilt unit of the
CamIO wall mount foot.
•
Insert the supplied
cover
into the free opening
of the CamIO wall mount foot.
•
Insert the turn/tilt unit of the camera into the
vertical opening of the mount (all the way to
the stop).
•
Place the hex nut into the corresponding hole, insert the
Allen screw
with
washer and lightly fasten the screw so that you can still easily turn the cam-
era.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
25
/56
MOBOTIX CamIO User Manual
Insert the cover!
Maximum torque for all
screws is 1 to 1.2
Nm
(0.74
lbf ft)
Insert cover
