Mounting the CamIO in four steps
Mounting the CamIO is done in four steps (or three, if no external devices are con-
nected; skip step 3 in this case):
1)
Preparing the camera: Mounting the CamIO Wall Mount and the Control
Cable
Replace the foot of the original SecureFlex wall mount against the foot of the
CamIO wall mount. This step includes connecting the M12/M22 control cable
to the camera and guiding it and the network cable into the CamIO wall
mount (
section 2.3).
2) Preparing the CamIO: Mounting the CamIO Housing and Installing the
Cables
First, mount the housing of the CamIO to a wall. This step involves connecting
the network cable and the power cable coming from the building infrastruc-
ture to the CamIO (
section 2.4).
3) Connecting External Components to the CamIO
This (optional) step involves connecting external devices, sensors and audio
devices to the CamIO (terminals 3 to 16 of the terminal connectors;
section
2.5).
4) Mounting the Camera on the CamIO
Install the MOBOTIX camera (mounted to the CamIO wall mount foot) on the
CamIO housing. This step involves connecting the cables to the camera
(audio cables, Ethernet cables, CamIO control cable;
section 2.6).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
23
/56
MOBOTIX CamIO User Manual
