Zeus150
User Manual
V 1.1.5 - 21/10/2020
Page 12 of 16
2.2.5 Update Menu
In this menu is possible to update the software of the various components of the system, using
the SW update packages available on the manufacturer site
The update is performed by inserting a memory card with the
new software package into the MicroSD slot.
the instructions for programming the memory card are
provided on the manufacturer site, as well as the updated
software
2.2.6 Generator Menu
In this menu is possible to check the operating status of the generator components:
The icons shown in this figure can have on three different colors:
- Blue: working element actually active
- Gray: working element actually not active
- Red: failed element, error issued
In the event of an error signal, the error can be reset by pressing the relative icon for 3-5
seconds and waiting for another 5-10 seconds for the update and the checks performed by the
system. It is possible to reset errors by pressing the reset button (see paragraph 2.2.7)
Back to
Service Menu
Combustion
status
Water pump
status
Fuel pump
status
Spark plug
status
Cooling fan
status
Burner fan
status
Generator
HW-SW version
Back to
Generator Menu
Display HW/SW
version
Sw update
Control Unit
HW/SW version
Reset
Function
