AWS-4000
Technical Installation Guide
Mobileye Technologies Ltd.
Proprietary and Confidential
Page 67
A wrong value
Message.
error. The correct value is 1.20 or 1.2
13
The AWS Setup
Wizard fails to
connect to the AWS
in Connection Phase
Slide (slide 3)
The Kvaser cable and AWS CAN
Splitter cable are not connected
correctly to each other and/or to
the PC.
The AWS Power is OFF
Make sure that all AWS connections are
Connected correctly.
Verify the AWS is receiving power and
turns on when vehicle ignition is on.
14
In the Test Drive
Slide the speed
indication in the AWS
Setup Wizard does
not match to that of
the Vehicle.
The VSS Value (Speed Params)
is not the Correct VSS value for
this particular vehicle.
See Section 3.3.10 in the AWS 4000
Installation Guide.
15
The Fail safe Icon is
permanently lit on the
Display unit?
Dirt on the Windshield.
Dirt inside the camera mount or
on the camera lens.
Wiper or any other obstruction is
in the way of the camera lens.
Clean the windshields from the outside
and inside (you can remove the camera
mount bottom part easily by pulling it
down).
Verify no obstructions are in the camera
lens way,