AWS-4000
Technical Installation Guide
Mobileye Technologies Ltd.
Proprietary and Confidential
Page 6
1.2.
S
YSTEM
L
IMITATIONS
•
The Mobileye AWS is intended for paved roads, with clear lane markings.
•
The Mobileye AWS only detects fully visible rear ends of vehicles. Therefore
the detection of crossing, oncoming, and passing vehicles, as well as
motorcycles, bicycles, and pedestrians is not supported.
•
The Mobileye AWS does not guarantee 100% accuracy in the detection of
vehicles or driving lanes, nor in providing warnings of all potential road
hazards. In addition, road, weather and other conditions can adversely
affect the Mobileye AWS system’s recognition and response capabilities.
•
Any conditions that form partial or full blockage of the camera’s view will
result in reduced or non-functionality of Mobileye AWS. Always ensure clear
camera view.
1.3.
I
NSTALLATION AND
S
AFETY
I
NSTRUCTIONS
•
Mobileye AWS installation must be carried out by an Authorized Mobileye
AWS Dealer or Installer.
•
The Mobileye AWS system should not be transferred between vehicles,
other than by an Authorized Mobileye AWS Dealer or Installer.
•
The Mobileye AWS should only be operated with 12VDC~24VDC power.
•
Do not cover or obstruct the Camera Unit or Mobileye AWS Display and
Control Unit.
•
Only proper tools are to be used.
•
Only L.E.D voltage tester or Digital Multi Meter should be used.
The use of light bulb voltage tester is prohibited.
•
Pay attention to unusual colour cables for example: yellow cable isolation
belongs to air bags; two twisted wires usually belong to different sensors
(digital).
•
Before disconnecting the battery or the radio connectors make sure to have
the radio code.
•
Do not disconnect any plug or connector in the vehicle when the ignition
switch is turned On.