AWS-4000
Technical Installation Guide
Mobileye Technologies Ltd.
Proprietary and Confidential
Page 37
3.3.4.
Car Hood Step
NOTE
:
Perform car hood calibration only if there is a permanent obstruction to the
camera’s field of view by the car hood
Adjust car hood to exclude the car hood areas from being
processed by moving the mark (Red Line ) using the drag
bar on the left side of the image, by clicking on the correct
location in the image using the Mouse device or by using the
keyboard arrows, until the cross is in the right position (see
Figure 2-6).
Figure
3-6
Car hood alignment
When done, click ‘Next’