Additional features of the device
How can I control external device? (only with special adapter)
With Compact IIP+A You can also control some external device for example camera, light relay. It is only one condition:
device must have digital input. For this purposes it is possible to use external port connector.
Please find more information below.
A
– Voltage Supply
B
– Signal (normal
1
)
C
– Ground
Please do not use external
connector for device witch
current consumption is over
15 mA, because of battery
life time!
SET
ALARM
(space)
(space)
14
RELAY
(space)
Note: SET Relay
and
SET Relay Alarm
can work parallel. External device will work when relay alarm clock will count
down (after sensor was exited) or relay was activate manually by
SET Relay
. When relay alarm time is out and
SET
Relay
was sent external device works still before you send
RESET Relay
.
SET
RELAY
(space)
RESET
RELAY
(space)
This command will SET low state (logic
0
) on Signal line marked as
B
on scheme
This command will SET high state (logic
1
) on Signal line marked as
B
on scheme
External device controlled by Compact IIP+A can be also combined with sensors build into Compact IIP+A like move, vibra or
voice. When sensor is exited the state on Signal output will change to logic
0
and activate external device.
The time for how long device must work
(for example video camera).
Range is from 1 to 180 minutes!
Special adapter!
44
Summary of Contents for Compact IIP+A1
Page 1: ...Compact IIP A1 Ver 1 9xP User manual www mobi click com 20 03 2015...
Page 53: ...Your notes 54...
Page 54: ......
