© MOBATIME
18 / 32
800697.09
6
Local time calculation
6.1
Basic setting
– control according to source of synchronization
P4
A
Time zone is carried over from the source of synchronization
P5
0
Neither MOBALine time zone nor time zone server are used
P6
A
Display time and date according to source of synchronization incl.
daylight saving time
This setting is suitable for digital clocks controlled by a master clock as slave clocks in
a time distribution system using the MOBALine, Active DCF 77 or IRIG time signal. An
internal time zone table is not used.
6.2
Calculation using MOBALine time zones
P4
A
Time zone is carried over from the source of synchronization. The
UTC time calculation is based on the MOBALine information.
P5
1 - 20
Selection of the MOBALine time zone
P6
A
Display time and date according to chosen MOBALine time zone,
incl. daylight saving time
This setting is suitable for digital clocks controlled by a master clock as MOBALine
slave clocks in a time distribution system with the possibility to display different
MOBALine time zones.
6.3
Calculation using Time-zone server MOBATIME
P4
A
NTP protocol uses UTC time zone
P5
1 - 15
Selection of the time zone server time zone
P6
A
Display time and date according to chosen time zone server time
zone, incl. daylight saving time
This setting is suitable for NTP and PoE digital clocks controlled by MOBATIME NTP
servers, which support the time zone server functionality.
6.4
Calculation using time zone entries preconfigured by MOBA-NMS
software
P4
A
NTP protocol uses UTC time zone
P5
0
No time zone server is used
P6
U1-U7
Display time and date according to chosen preconfigured time zone
entry, incl. daylight saving time
This setting is suitable for NTP and PoE digital clocks, where several user defined time
zone entries should be used. The time zone entries are preconfigured by means of the
MOBA-NMS software.
