Using the Laserguide
© Copyright MOBA Mobile Automation Australia Pty Ltd
9
compensation).
R.45.TC/R.45.TC.PRO magnetic bracket (relevant only when using tilt
With regard to Figures 3 & 4 refer to section 2.2.1 if intending to use the tilt
compensation feature or to section 2.2.2 if intending NOT to use the tilt compensation
feature.
Setup Length - Distance from bucket pivot pin to 'MT REF' line mark on the side of the
B - Bucket height from bucket pivot pin to ground when the bucket is level
L - Height of the laser instrument referenced to the bottom of the trench.
C - Desired depth of cut or excavation referenced to the benchmark.
HI - Height of the laser instrument referenced to the benchmark.
OUT-TRENCH SETUP
Figure 4
