Figure 6
Once the App is connected it will start to mirror the receiver’s height information. If this
does not happen, close the MCE.R45APP and re-open it. If setup fails, switch off the
R.45.TC.PRO, shut down the app and unpair the Android device from the R.45.TC.PRO.
Then repeat steps 2 - 5.
3.2 Communicating with the DB.UNI.PRO
The DB.UNI.PRO will automatically pair with the R.45.TC.PRO and start to mirror its LED
clusters. If the two do not establish communication, switch both off and on again. See
section 3.3 if this does not work.
2. Switch on both the R.45.TC.PRO and DB.UNI.PRO display panel.
1. Ensure the R.45.TC.PRO and DB.UNI.PRO are in close proximity with each other.
BT Connectivity
© Copyright MOBA Mobile Automation Australia Pty Ltd
15
DB.UNI.PRO
R.45.TC.PRO
FINE
WIDE
MED
Bandwidth
Brightness
Power
ON
