When the LED cluster pattern of the new accuracy setting lights up, keep holding the
Accuracy switch (8) and press and release the On/Off switch (10). With each press and
release of the On/Off switch (10) while the Accuracy switch (8) is held, the brightness
level will change to the next setting. Three different brightness settings are available.
Note that after changing the brightness level in this manner, the accuracy setting will
also have changed - revert back to the desired accuracy using the Accuracy switch (8).
If low battery is detected, the power-on LED will flash at a fast rate (not to be confused
with the slower flashing rate indicating compensation mode is switched on). If a laser
beam is on the receiving area at the time of low battery, the flashing frequency of the
indication LEDs will slow and the buzzer will turn off to preserve power.
2.6 LED Brightness
To increase or decrease the brightness of the LEDs, press and hold the Accuracy switch
(8) in the same manner as when changing the accuracy setting.
To turn the buzzer on or off, press and hold the On/Off switch (10) until a single or
double beep is heard - single beep indicates buzzer on, double beep indicates buzzer
off.
2.5 Buzzer
2.7 Low Battery Warning
Using the Laser Guide
© Copyright MOBA Mobile Automation Australia Pty Ltd
13
