4
Preparing the Stabil-Ion System for Operation
4-12
Series 370 Stabil-Ion Instruction Manual - 370119
6.
Press the
SELECT
key to store the new setting.
7.
Press
CANCEL
to return to the control menu.
(Or press
CANCEL
again to return to the status display for the gauge tube
that is turned ON.)
8.
To change the gas type label, open the door and lift the label card from its slot in the front
panel. Gas type labels are included in the mounting hardware kit (see Figure 4-5 on page
4-11).
4.3.4 Setup Menu Variables
4.3.4.1 Units of Measure
The default factory setting for this function is
TORR.
1.
Press the
▼
arrow key until you see the setup menu.
2.
Press the
SELECT
key to see the units display.
3.
Press the
SELECT
key again so that the unit
TORR
(or
PASCAL,
or
mBAR
)
is flashing.
4.
Press the
▲
or
▼
arrow keys to select the desired units.
5.
Press the
SELECT
key to store the new setting in memory.
6.
Press
CANCEL
to return to the setup menu.
(Or press
CANCEL
again to return to the status display for the gauge tube
that is turned ON.)
NOTE: This function changes units for the electrometer module only. The Convectron units
need to be changed separately
4.3.4.2 Selecting Degas Time
The default factory setting for this function is 10 min.
1.
Press the
▼
arrow key until you see the setup menu.
2.
Press the
SELECT
key to see the units display.
3.
Press the
▼
key until you see the degas time display.
CGA GAS b
Ar
Control
Menu
Setup
Menu
UNITS
TORR
UNITS
TORR
UNITS
PASCAL
UNITS
PASCAL
Setup
Menu
Setup
Menu
UNITS
TORR
DEGAS
TIME
10
Summary of Contents for Stabil-Ion 370 Series
