MKS Stabil-Ion 370 Series, Instruction Manual, Page: 64 / 122

4 Preparing the Stabil-Ion System for Operation
4-6
Series 370 Stabil-Ion Instruction Manual - 370119
3. Turn ON the controller power and watch the LCD display until it displays
mm Load to IG1 a or mm Load to CGA a. The flashing IG1a signifies
the location to which the Module data will be loaded. If you take no action
for 15 sec., data from the module will automatically load into the TMP
area, and the display will return to
IG1 status .
4. Use the
▲
or
▼
keys to select alternate Gauge/gas table locations.
5. When the desired gauge is selected, press the SELECT key.
6. Press the SELECT key again if the Gauge selection is correct. When data
is finished loading, display returns to IG1 status.
7. Turn OFF power to the Controller and remove the Module.
8. Repeat the process for other Gauges/Modules as necessary.
The serial number of the gauge, and the IG channel to which it is assigned, is displayed using the
Serial # function under the INFO Menu.
The serial number of the gauge, and the IG channel to which it is assigned, is displayed using the
Serial # function under the INFO Menu.
1. Press the
▲
arrow key until you see the information menu.
2. Press the SELECT key to see the serial number display.
3. Press the SELECT key again to see the IG1 gauge serial number.
4. Press
▼
repeatedly to view the successive displays (e.g. IG1 a, or IG1 b,
…). The small letter, ‘a’ and ‘b’ represent the gas type. The 00 number is
the calibration revision for this serial numbered gauge.
The ##### is the Serial No. of the gauge, which matches the label on the
Stabil-Ion Gauge. See Figure 1-2 on page 1-1.
5. When finished press CANCEL repeatedly until IG1 status appears.
Table 4-2 Gauge Location and Gas Type Table
Gas Type Tube Serial No. System Designation
IG1 (gas) a
(gas) b
IG2 (gas) a
(gas) b
mm Load
to IG1a
mm Load
to IG1b
Hit SLCT
to Load!
Loading
Changes!
Info
Menu
Serial
IG #’s
IG1 a 00
#####
IG1 b 00
#####