
Chapter Two: Installation
Setup
29
Mounting Instructions
The 870/872 transducer can be mounted in any position; it is fully functional regardless of its
orientation. When mounting the unit, be sure to consider accessibility to the user adjustable zero
potentiometer, which is located on the side of the transducer. Refer to Figure 1, page 25 for the
870 unit. For the flow-though 872 unit, the zero pot is located 45° off the flow access. Refer to
Figure 3, page 27.
Welded Connections
To weld a transducer in line to a system, you should follow certified welding practices, such as
those published by the American Welding Society (AWS) or the American Society of Mechanical
Engineers (ASME).
Warning
Improper welding can cause personal injury or damage
equipment. Follow proper welding procedures at all times.
Mechanical Connections
To make mechanical connections in line to a system, use the recommended installation practices,
as specified by the fitting manufacturer or by an appropriate standard. Tighten VCR fittings
1
/
8
turn past the finger tight position for 316 SS or nickel gaskets.
Warning
Improper installation can cause personal injury or damage
equipment. Follow proper installation procedures at all times.
Summary of Contents for Micro-Baratron 870B
