MKS Baratron 121A, Instruction Manual, Page: 31 / 62

Chapter Two: Installation How To Unpack the Type 121 Unit
21
Chapter Two: Installation
How To Unpack the Type 121 Unit
MKS has carefully packed the Type 121 unit so that it will reach you in perfect operating order.
Upon receiving the unit, however, you should check for defects, cracks, broken connectors, etc.,
to be certain that damage has not occurred during shipment.
Note
Do not discard any packing materials until you have completed your
inspection and are sure the unit arrived safely.
If you find any damage, notify your carrier and MKS immediately. If it is necessary to return the
unit to MKS, obtain an ERA Number (Equipment Return Authorization Number) from the MKS
Service Center before shipping. Please refer to the inside of the back cover of this manual for a
list of MKS Calibration and Service Centers.
Caution
Only qualified individuals should perform the installation and any
user adjustments. They must comply with all the necessary ESD and
handling precautions while installing and adjusting the instrument.
Proper handling is essential when working with all highly sensitive
precision electronic instruments.
Unpacking Checklist
Standard Equipment:
•
Type 121 Electronics Unit
•
Type 121 Sensor Unit
•
Type 121 Instruction Manual (this book)
Optional Equipment:
•
Electrical Connector Accessories Kit: 121A-K1 (includes a mating connector for the
14-pin micro-ribbon connector)
•
Cables to connect the signal conditioner to a readout or controller. Refer to Interface
Cables, page 22, for information.