MKS 651D Series, User Manual, Page: 97 / 162

Chapter Five: Remote RS-232 Operation Setup Messages
85
Description Command Request Response
Gain M x value
x: 1 = Gain SP A
2 = Gain SP B
3 = Gain SP C
4 = Gain SP D
5 = Gain SP E
value: 0 to 100%
R xx
xx: 46 = Gain SP A
47 = Gain SP B
48 = Gain SP C
49 = Gain SP D
50 = Gain SP E
M x value
x
: 1 = Gain SP A
2 = Gain SP B
3 = Gain SP C
4 = Gain SP D
5 = Gain SP E
value:
0 to 100%
Phase X x value
x: 1 = Phase SP A
2 = Phase SP B
3 = Phase SP C
4 = Phase SP D
5 = Phase SP E
value: 0 to 100%
R xx
xx: 41 = Phase SP A
42 = Phase SP B
43 = Phase SP C
44 = Phase SP D
45 = Phase SP E
X x value
x
: 1 = Phase SP A
2 = Phase SP B
3 = Phase SP C
4 = Phase SP D
5 = Phase SP E
value: 0 to 100%
Gain Compensation
Factor
GC value
value: 0 to 100.0%
RGC GC value
value: 0 to 100.0%
Phase Compensation
Factor
PC value
value: 0 to 100.0%
RPC PC value
value: 0 to 100.0%
Softstart Rates I x value
x: 1 = Set Point A
2 = Set Point B
3 = Set Point C
4 = Set Point D
5 = Set Point E
6 = Analog Set Pt
7 = Valve open
8 = Valve close
value: 0.1 to 100%
full speed
R xx
xx: 15 = Set Point A
16 = Set Point B
17 = Set Point C
18 = Set Point D
19 = Set Point E
20 = Analog Set Pt
21 = Valve open
22 = Valve close
I x value
x
: 1 = Set Point A
2 = Set Point B
3 = Set Point C
4 = Set Point D
5 = Set Point E
6 = Analog Set Pt
7 = Valve open
8 = Valve close
value
: 0.1 to 100%
full speed
Process Limit Relays P x value
x: 1 = Low - PL1
2 = High - PL1
3 = Low - PL2
4 = High - PL2
value: pressure limit
R xx
xx: 11 = Low - PL1
12 = High - PL1
13 = Low - PL2
14 = High - PL2
P x value
x : 1 = Low - PL1
2 = High - PL1
3 = Low - PL2
4 = High - PL2
value
: pressure limit
Table 15: RS-232 Set Point Messages * Initial setting